What a pressure washer hose attachment can and can't do

What it genuinely can match

A quality hose attachment concentrates your existing tap pressure into a forceful, focused stream. That's enough to lift dust, cobwebs, loose dirt, general grime, algae film and light moss from concrete, pavers, outdoor furniture, bins, boats, caravans and vehicles. For the everyday build-up that accumulates on an Australian property between proper cleans, it does the job a pressure washer would — without dragging out a machine, finding a power point, or paying for petrol.

What it can't match

A petrol or electric pressure washer generates far higher PSI mechanically, using a pump rather than relying on mains water pressure alone. That extra force is what strips baked-on oil stains, years-old rendered paint, or heavy embedded grime from stone. A hose attachment won't get there — it's a tool for maintenance-level and moderate cleaning, not industrial stripping. If you're chasing decade-old stains or preparing a surface for repainting, a proper pressure washer or professional service is the more honest answer.

A realistic job list

• Rinsing dust and light grime off driveways and paths between deeper cleans
• Washing cars, utes, boats, caravans and trailers
• Clearing loose debris and light moss from paving joints
• Rinsing outdoor furniture, bins and fencing
• General gutter and roof rinsing (with appropriate caution at height)
• Washing muddy pets and gear after a day outdoors

Setting realistic expectations

Results depend heavily on your household water pressure and hose length — a long, kinked or narrow-diameter hose will noticeably reduce what any attachment can deliver. On very low-pressure properties or long rural hose runs, even a strong attachment will feel weaker than it does on strong mains pressure. Test a small, inconspicuous area first on paint, timber, artificial turf, solar panels or anything already worn, since concentrated jets can mark softer surfaces.

Setting it up

1. Turn off the tap before attaching, then screw or click the nozzle onto your hose end
2. Turn the tap on fully for maximum available pressure
3. Start with the fan head on unfamiliar or delicate surfaces to gauge the response
4. Switch to the jet head for stubborn grime, holding it at a slight angle rather than straight-on
5. Keep the nozzle moving rather than holding it still in one spot on painted or soft surfaces
6. Lock the trigger for longer jobs to save your grip

Where TurboJet sits in this picture

TurboJet is a hose-powered nozzle, not a pump-driven machine — it delivers up to 5x the pressure of an ordinary garden hose nozzle, which puts it well above a standard nozzle and squarely in maintenance-and-moderate-cleaning territory. It's honest to say it's far more effective than an ordinary hose nozzle and enough for most household jobs, without the weight, cost, noise or power lead of a full pressure washer.